Alterações no passo nº 2
Edição por Venancio Zuniga —
Edição aprovada por Venancio Zuniga
- Antes
- Depois
- Sem alteração
Linhas do passo
[* black] Remove the two screws from the backplate using a Phillips #0 Screwdriver. | |
+ | [* icon_reminder] Turn the screws counter clockwise to remove them, and turn the screws clockwise will re-insert them. |
[* black] Store screws in a safe place. | |
- | [* icon_ |
+ | [* icon_note] Using a bowl, container with a lid, or a magnet to hold your screws is always good practice |