Alterações no passo nº 2
Edição por Sam Goldheart —
Edição aprovada por Sam Goldheart
- Antes
- Depois
- Sem alteração
Linhas do passo
| - | [* black] Use tweezers to peel up the battery pull tab. Do not pull too hard or you may tear the tab. |
|---|---|
| + | [* icon_caution] In the following steps you will only lift the battery, ***do not completely remove it***—it's still connected to the motherboard. |
| + | [* black] Use tweezers to gently peel the battery pull tab up enough to grab. |
| [* black] Use your fingers to grip the battery pull tab and lift the battery up from the phone. | |
| - | [* icon_caution] Do not completely remove the battery yet—it's still connected to the motherboard. |
| [* icon_note] If the battery is hard to remove, applying a small amount of high concentration (over 90%) isopropyl alcohol or adhesive remover under the battery may help. | |
| - | [* icon_note] Heating the area behind the battery may help soften the adhesive, but be very careful to avoid overheating the battery. |
| [* black] If the pull tab breaks, use the flat end of a spudger or an old credit card to pry up carefully on the edges of the battery until it comes loose. | |
| - | [* icon_caution] |
| + | [* icon_caution] The battery can catch fire and/or explode if damaged so be extremely careful. |
| [* icon_caution] Never reinstall a damaged or deformed battery. Replace the battery. |