Histórico do passo nº 3 do guia 2055 Poulan Chainsaw Carburetor Seal Replacement

	[title] Removing the Carburetor
-	[* red] Pull air filter from housing
-	[* orange] Remove air filter housing using ~~8mm~~ socket
-	[* green] ~~Using a narrow flat head screw driver disconnect~~ the two fuel lines from the carburetor
-	[* blue] Disconnect the throttle linkage from the carburetor
-	[* black] Lift the choke linkage out of the housing and pull the carburetor from the housing
+	[* red] Pull the air filter from the housing.
+	[* orange] Remove the air filter housing using a 8 mm socket.
+	[* green] Disconnect the two fuel lines from the carburetor using a narrow, flat-head screw driver.
+	[* blue] Disconnect the throttle linkage from the carburetor.
+	[* black] Lift the choke linkage out of the housing, and then pull the carburetor from the housing.