Alterações no passo nº 2
Edição por K. Niblock —
Edição aprovada por K. Niblock
- Antes
- Depois
- Sem alteração
Linhas do passo
| [title] Removing Covers | |
| - | [* red] Remove top cover screws (3) using #6 flat head screw driver |
| - | [* orange] Loosen the 1/4" nuts holding the bar cover in place |
| + | [* red] Remove top cover screws (3) using #6 flat head screw driver on the chainsaw T-wrench |
| + | [* orange] Loosen the 1/4" nuts holding the bar cover in place using the chain saw T-wrench |
| [* blue] Turn chain tension adjustment screw two turns counter clockwise | |
| - | [* orange] Remove nuts holding bar cover in place then remove bar |
| + | [* orange] Remove nuts holding bar cover in place then remove bar |
| [* yellow] Using 5/32" Allen wrench remove fly wheel cover |