/
Minha bancada de trabalho

Obtenha acesso rápido a guias, peças e respostas para seus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Cadastre-se
Login

Alterações no passo nº 3

Edição por Teena Carnegie —

Edição aprovada por Teena Carnegie

Antes
Depois
Sem alteração

Linhas do passo

-[* black] On the right side, locate the piece of clear tape connected to the cooling system (this is also called a heat sink and is a piece of metal located directly to the right of the USB ports). This is connected to the hinge by a short, black cord.
-[* red] Remove the clear tape from the cooling system and disconnect cable underneath.
-[* orange] On the left side, above the Hard Drive, there is a wire that must be disconnected to disconnect the base from the screen display.
-[* yellow] Disconnect the screen display from the base.
+[* black] On the right side, locate the piece of clear tape connected to the cooling system (also called a heat sink).
+[* black] Remove the clear tape from the cooling system.
+[* red] Disconnect the cable.
+[* orange] Disconnect the wire located above the Hard Drive from the screen display.