|
Introduction |
If the LCD screen is not powering on after the LCD/Finder button has been pressed twice, then the screen may need to be replaced. This guide describes the steps of replacing a screen. | | Use this guide to replace the LCD screen of your Sony Cyber-shot DSC-HX300. | | | The LCD (liquid-crystal display) screen is a flat panel that uses liquid crystals, polarizers, and a backlight or reflector to display images. Without the LCD screen, the user is unable to access some information or the image gallery. | | | If the LCD screen is not powering on after the LCD/Finder button has been pressed twice, then the screen may need to be replaced. | | | You will need a new screen and a 2 cm Phillips head screwdriver. Having a project mat and opening tool may be helpful as well. | | Before starting this guide, make sure to review the [[Sony Cyber-shot DSC-HX300 Troubleshooting|repair page|new_window=true]]. There may be charging or battery issues that are causing issues rather than the LCD screen itself. | | | Make sure to turn off your camera before starting this guide. |
|