Histórico da introdução: Canon EOS Rebel T2i Main PCB Board Replacement

dispositivo	Canon EOS Rebel T2i
Type	replacement
Thing	Main PCB Board
Title	Canon EOS Rebel T2i Main PCB Board Replacement
Introduction	This guide shows you how to remove the main PCB board in the camera. This is useful in the event that the main PCB board is damaged and needs to be replaced, or if you need to access other parts such as the SD card board, or the imaging sensor. When you install the new main PCB board and are reconnecting the cables, note the single round black cable that leads to the top cover. This cable connects to the right side of the board and the connector is attached to the back of the board. To reconnect it, you simply need to push the cable down into the hole on the connector. This cable is a fiber optics cable used for the camera flash. Forgetting to reconnect this cable will likely cause the camera flash to no longer function.
Time Required Min	30 minutos
Time Required Max	30 minutos
Imageid	Antes Depois
Difficulty	Moderate
Conclusion	To reassemble your device, follow these instructions in reverse order.
Author	Zephosk
Public	Não

Pré-requisitos de guia

• Nº 1 era empty, mas agora é Canon EOS Rebel T2i I/F Terminal Cover Replacement.
• Nº 2 era empty, mas agora é Canon EOS Rebel T2i Back Cover Replacement.
• Nº 3 era empty, mas agora é Canon EOS Rebel T2i Front Cover Replacement.
• Nº 4 era empty, mas agora é Canon EOS Rebel T2i Top Casing Replacement.

Ferramentas

Sinalizadores

Documentos

Passos

Passo nº: 1

Antes

Depois

Passo nº: 2

Antes

Depois

Passo nº: 3

Antes

Depois

Passo nº: 4

Antes

Depois