/
DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Cadastre-se
Login

Histórico da introdução: Bernina 350 PE L-Board D5 Capacitor Replacement

Edição por NorthernBigDummy —

Edição aprovada por NorthernBigDummy

Antes
Depois
Sem alteração
dispositivo
Sewing Machine
Type
replacement
Thing
Capacitor
Title
Bernina 350 PE L-Board D5 Capacitor Replacement
Introduction
For Bernina sewing machines that no longer turn on or the sewing machine takes 10 to 60 minutes for it's display and light to illuminate after turning the switch on, the l-board have a defective capacitor - follow this guide to replace the l-board's D5 capacitor.
Note: for the soldering step, I accidentally had my soldering gun set to 400 and burned through the trace, but there's plenty of room on the board and I was able to add a new wire to link repair the burned trace. Setting your soldering gun to 340 C and using more flux may avoid what I did.
Time Required Min
1 hora
Time Required Max
1 hora
Imageid
Antes
Depois
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order beginning with Step 2.
Author
NorthernBigDummy
Public
Não

Ferramentas

  • Tweezers x1 added.
  • TR10 Torx Security Screwdriver x1 added.
  • Torx T20 Screwdriver x1 added.
  • Soldering Gun / Iron and Solder x1 added.
  • Wire Cutters/Side Cutters x1 added.

Peças

  • 100uF 25V Electrolytic Capacitor x1 added.
  • Solder Wick Braid x1 added.
  • Lead-Free Solder x1 added.

Sinalizadores

  • In Progress added.
  • Community-Contributed Guide added.

Passos

Passo nº: 1
Antes
Depois
stepid 357144 stepid 357144
Passo nº: 2
Antes
Depois
stepid 357145 stepid 357145
Passo nº: 3
Antes
Depois
stepid 357146 stepid 357146
Passo nº: 4
Antes
Depois
stepid 357149 stepid 357149
Passo nº: 5
Antes
Depois
stepid 357150 stepid 357150
Passo nº: 6
Antes
Depois
stepid 357151 stepid 357151
Passo nº: 7
Antes
Depois
stepid 357152 stepid 357152