Ir para o conteúdo principal

Histórico da introdução: Screen Prerequisite (No LiDAR Assembly Removal)

Edição por Chayton Ritter

Edição aprovada por Chayton Ritter

Antes
Depois
Sem alteração
dispositivo
iPad Pro 11" 2nd Gen
Type
replacement
Thing
Screen Prerequisite (No LiDAR Assembly Removal)
Title
Screen Prerequisite (No LiDAR Assembly Removal)
Introduction
Follow this guide to replace the screen on your iPad Pro 11" 1st gen.
If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].
***The LiDAR sensor assembly attached to the screen is paired with the Face ID hardware. You'll need to transfer it to your new screen to keep Face ID functionality.***
Time Required Min
1 hora
Time Required Max
2 horas
Imageid
Antes
Depois
Difficulty
Difficult
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
***To reassemble your device, follow these instructions in reverse order.***
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPad%20Pro%2011%22|iPad Pro 11" 1st Gen answers community] for help.
Author
Public
Sim

Ferramentas

  • Clampy - Anti-Clamp x1 added.
  • iOpener x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Phillips #00 Screwdriver x1 added.
  • Tweezers x1 added.
  • Technician's LED Penlight x1 added.
  • Deck of Cards x1 added.
  • Magnetic Mat Replacement Pen x1 added.
  • Utility Scissors x1 added.
  • Spudger x1 added.

Peças

  • iPad Pro 11" (2018/2020) Adhesive Strips x1 added.
  • iPad Pro 11" (2018, 2020) Screen x1 added.

Sinalizadores

  • Prerequisite Only added.

Passos

Passo nº: 1
Antes
Depois
Passo nº: 2
Antes
Depois
Passo nº: 3
Antes
Depois