/
DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Cadastre-se
Login

Histórico da introdução: Stihl BG 50 Pull Start Rope Replacement

Edição por Christian A. —

Edição aprovada por Christian A.

Antes
Depois
Sem alteração
dispositivo
Stihl blower BG 50
Type
replacement
Thing
pull start rope
Title
Stihl Blower Pull Start Repair
Introduction
Use this guide to replace a broken or worn-down pull start rope from a Stihl blower BG 50.
The purpose of the pull start rope is to start the combustion engine. The rope can become brittle if it is not used frequently or it may begin to tare after extensive use. If the rope is only dirty it is not necessary to replace it. If the rope has already broken step 2 can be skipped.
It is not necessary but removing the fuel from the blower’s fuel tank would remove the possibility of a fire-related accident happening.
The old rope should be disposed of but the pull start handle can be kept as a spare part.
Time Required Min
10 minutos
Time Required Max
20 minutos
Imageid
Antes
Depois
Difficulty
Moderate
Conclusion
When the pull start rope is pulled it should wind back. If it does not, a mistake might have occurred when changing the new rope when winding it inside the starter pulley.
Author
Christian A.
Public
Não

Ferramentas

  • iFixit Tech Knife x1 added.
  • Torx T25 Screwdriver x1 added.

Sinalizadores

  • In Progress added.
  • Student In Progress added.

Passos

Passo nº: 1
Antes
Depois
stepid 297299 stepid 297299
Passo nº: 2
Antes
Depois
stepid 297300 stepid 297300
Passo nº: 3
Antes
Depois
stepid 297301 stepid 297301
Passo nº: 4
Antes
Depois
stepid 297302 stepid 297302
Passo nº: 5
Antes
Depois
stepid 297303 stepid 297303
Passo nº: 6
Antes
Depois
stepid 297304 stepid 297304
Passo nº: 7
Antes
Depois
stepid 297305 stepid 297305
Passo nº: 8
Antes
Depois
stepid 297306 stepid 297306
Passo nº: 9
Antes
Depois
stepid 297307 stepid 297307