Histórico da introdução: Huawei Mate 20 Pro Motherboard Cover with NFC & Charging Coil Replacement

Dispositivo	Huawei Mate 20 Pro
Type	replacement
Thing	Motherboard Cover with NFC & Charging Coil
Title	Huawei Mate 20 Pro Motherboard Cover with NFC & Charging Coil Replacement
Introduction	Use this guide to remove or replace a defective motherboard cover with NFC & charging coil in your Huawei Mate 20 Pro. Opening the Huawei Mate 20 Pro will '''damage the waterproof sealing''' on the device. If you do not replace the adhesive seals, your phone will '''function normally''' but will '''lose its water-protection'''. You’ll need replacement adhesive to reattach components when reassembling the device.
Time Required Min	30 minutos
Time Required Max	45 minutos
Imageid	Antes Depois
Difficulty	Moderate
Conclusion	To reassemble your device, follow these instructions in reverse order. Apply new adhesive where necessary after cleaning the relevant areas with isopropyl alcohol (>90%). Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]]. Repair didn’t go as planned? Check out our Answers community for troubleshooting help.
Author	Dominik Schnabelrauch
Public	Não

Pré-requisitos de guia

• Nº 1 era empty, mas agora é Huawei Mate 20 Pro Rear Glass Replacement.

Ferramentas

Peças

Sinalizadores

Passos

Passo nº: 1

Antes

Depois

Passo nº: 2

Antes

Depois

Passo nº: 3

Antes

Depois

Passo nº: 4

Antes

Depois

Passo nº: 5

Antes

Depois