Ir para o conteúdo principal

Histórico da introdução: Huawei Honor 9 Screen Replacement

Edição por Dominik Schnabelrauch

Edição aprovada por Dominik Schnabelrauch

Antes
Depois
Sem alteração
dispositivo
Huawei Honor 9
Type
replacement
Thing
Screen
Title
Huawei Honor 9 Screen Replacement
Introduction
Use this guide to remove the screen of the Huawei Honor 9.
Before disassembling your phone, '''discharge the battery below 25%'''. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged.
'''Note''': This guide instructs you to replace only the display while leaving the original frame and motherboard in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure. Make sure you have the correct part before starting this guide.
This guide involves removing the rear glass cover and the battery; you will need replacement adhesive to reattach both and/or a new batery. If your replacement part does not come with adhesive, use a strong double-sided tape such as [product|IF317-072|Tesa 61395|new_window=true] to secure it.
Time Required Min
1 hora
Time Required Max
2 horas
Imageid
Antes
Depois
Difficulty
Difficult
Conclusion
The best way to secure the new screen is with a sheet of custom-cut double-sided tape. Apply the tape to the back of the screen, then carefully feed the display cable through the frame. Align the screen and press it into place.
To reassemble your device, follow these instructions in reverse order.
If possible, turn on your phone and test your repair before installing new adhesive and resealing the phone.
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler]].
Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/Huawei%20Honor%209|Answers community] for troubleshooting help.
Author
Public
Não

Pré-requisitos de guia

Ferramentas

  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • iOpener x1 added.
  • Phillips #00 Screwdriver x1 added.
  • Spudger x1 added.
  • iFixit Adhesive Remover x1 added.
  • Plastic Cards x1 added.

Peças

  • Huawei P10 and Honor 9 Battery x1 added.

Sinalizadores

  • In Progress added.

Passos

Passo nº: 1
Antes
Depois
Passo nº: 2
Antes
Depois
Passo nº: 3
Antes
Depois
Passo nº: 4
Antes
Depois
Passo nº: 5
Antes
Depois
Passo nº: 6
Antes
Depois
Passo nº: 7
Antes
Depois
Passo nº: 8
Antes
Depois
Passo nº: 9
Antes
Depois
Passo nº: 10
Antes
Depois
Passo nº: 11
Antes
Depois
Passo nº: 12
Antes
Depois
Passo nº: 13
Antes
Depois
Passo nº: 14
Antes
Depois