/
DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Cadastre-se
Login

Histórico da introdução: How to fix Genie Intellicode Garage Remote Control battery issues

Edição por Mark H —

Edição aprovada por Mark H

Antes
Depois
Sem alteração
dispositivo
Genie Intellicode Garage Remote Control
Type
technique
Title
How to fix Genie Intellicode Garage Remote Control battery issues
Introduction
I have a number of Genie Intellicode garage door single button remote controls. Eventually they all start acting up, not working when you press the button. Sometimes it's just a dead battery, but sometimes this problem persists even after replacing the battery.
Sometimes just hitting the will get them working again. At one point I resorted to wrapping a rubber band between both contacts to hold them to the battery better, but eventually the rubber bands dry up and weaken.
In this guide I will show how to replace the battery contacts with a better battery holder. Due to space issues, you will need to cut some of the plastics of the remote control and the battery holder. You will also need to desolder the existing battery tabs and solder in new wires.
Time Required Min
Nenhuma estimativa
Time Required Max
Nenhuma estimativa
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Mark H
Public
Não

Sinalizadores

  • In Progress added.
  • Community-Contributed Guide added.

Passos

Passo nº: 1
Antes
Depois
stepid 238338 stepid 238338