Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

If you find that your laptop is sluggish when many programs are running, freezing, or randomly restarting. It may be time to add more RAM or replace the RAM currently in the laptop.

  1. Unscrew the single Phillips #0 screw from the RAM panel.
    • Unscrew the single Phillips #0 screw from the RAM panel.

  2. Remove the panel.
    • Remove the panel.

  3. OPEN ALL THE TABS

    RAM Upgrade Kits for Mac

    Confira os kits

    Enough RAM
    For All The Tabs

    Confira os kits
  4. Spread the clips away from the RAM module. When released, the RAM module will pop up at a slight angle.
    • Spread the clips away from the RAM module.

    • When released, the RAM module will pop up at a slight angle.

  5. Lift the RAM module to an angle of about 30 degrees and slide it out. Lift the RAM module to an angle of about 30 degrees and slide it out.
    • Lift the RAM module to an angle of about 30 degrees and slide it out.

Conclusão

To reassemble your device, follow these instructions in reverse order.

When installing the new RAM, push the RAM sticks in at an angle. Proceed to push each RAM stick down until the latches click, indicating that it is locked in.

Uma outra pessoa concluiu este guia.

William Mazanec

Membro desde: 29/01/2018

1.236 Reputação

8 Guias de autoria

Equipe

USF Tampa, Team S5-G6, Passmore Spring 2018 Membro de USF Tampa, Team S5-G6, Passmore Spring 2018

USFT-PASSMORE-S18S5G6

3 Membros

8 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 5

Duração total: 176