Introdução

The fix, I place a thin alloy shim between the existing heatsink & chip, with a good quality thermal paste, I always use artic silver 5(never lets you down)

Peças

Não são necessárias peças.

  1. This is a complete top half strip down to fix (takes me less than 30 minutes)
    • This is a complete top half strip down to fix (takes me less than 30 minutes)

    Adicionar comentário

  2. this is the culprit, as you can see the shim can easily overheat & go concave lifting off the chip.
    • this is the culprit, as you can see the shim can easily overheat & go concave lifting off the chip.

    Adicionar comentário

    • cut a thin piece of alloy to the same size as the existing shim, i used an old alloy door push plate(easy to cut) & is the ideal thickness

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Thoroughly clean the chip with pure alcohol, then apply an even spread of good quality thermal paste(Arctic silver 5) will never let you down

    Adicionar comentário

    • THen apply more thermal paste to the top of the shim

    Adicionar comentário

    • The new alloy shim is under the existing thin shim. I've done more than 20 of these repairs & had 100% success rate I always do the same to the CPU (might as well your already in there).,

    Adicionar comentário

    • This is the CPU with the new alloy shim fitted.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Terry Sim

Member since: 12-02-2011

161 reputação

Autoria de 1 guia

Pros: Very good hi-res pictures, well explained.

Cons: The disassembly instructions are missing

Nicola Nascimento - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 7

Todo: 1,747