Introdução

This guide will show you how to replace the battery in your T-Mobile Sparq or (Alcatel 606a). This is a fairly straight forward procedure that involves removing the back cover of the phone, removing the old battery and installing a new one.

Peças

  1. If you're looking at your phone from the front, feel the upper left hand rounded corner. You'll notice a thin opening between the front of the phone and the back cover.
    • If you're looking at your phone from the front, feel the upper left hand rounded corner. You'll notice a thin opening between the front of the phone and the back cover.

    • Flip the phone over (as in the picture) and use a spudger or your finger to gently separate the back cover from the phone.

    Adicionar comentário

  2. Once the back cover has been removed you can see a small groove above the center of the battery. The arrow on the battery is pointing to it.
    • Once the back cover has been removed you can see a small groove above the center of the battery. The arrow on the battery is pointing to it.

    • Insert the tip of your finger into the groove and gently lift the battery from the case.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

LeAnn Lewis

Member since: 07-04-2018

497 reputação

4 Guides authored

Equipe

IUPUI, Team S3-G3, Wilson Spring 2018 Membro de IUPUI, Team S3-G3, Wilson Spring 2018

IUPUI-WILSON-S18S3G3

3 Membros

4 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 33