Introdução

Seeing the image before taking it is vital to taking long-lasting quality pictures. This guide will show you how to properly remove the existing LCD screen.

Peças

Não são necessárias peças.

Power down the camera and remove the batteries.
  • Power down the camera and remove the batteries.

Adicionar comentário

Using a Phillips #0 screwdriver, remove all of the screws from the back panel casing. There are six 5.22mm long, 3.00mm head diameter screws total. The left side is not shown but there should be 1 screw on that side.
  • Using a Phillips #0 screwdriver, remove all of the screws from the back panel casing.

  • There are six 5.22mm long, 3.00mm head diameter screws total.

  • The left side is not shown but there should be 1 screw on that side.

Adicionar comentário

Remove the back casing. The casing itself is sturdy so don't be afraid to remove it forcefully.
  • Remove the back casing.

  • The casing itself is sturdy so don't be afraid to remove it forcefully.

Adicionar comentário

Take a hold of the right side of the LCD screen and lift it towards the left.
  • Take a hold of the right side of the LCD screen and lift it towards the left.

  • The screen is held firm and will require a bit of force to ease it from its housing.

Adicionar comentário

Unplug the large conductive tape attached to the screen.
  • Unplug the large conductive tape attached to the screen.

  • Remove the LCD from the device.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Trystan Jasperson

Member since: 17-03-2018

231 reputação

2 Guides authored

Equipe

Baylor, Team S5-G4, Williams Spring 2018 Membro de Baylor, Team S5-G4, Williams Spring 2018

BU-WILLIAMS-S18S5G4

3 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Todo: 63