Raleigh M20 Handlebars Replacement

Jon Ribera e 5 outros colaboradores

Última atualização em January 20, 2025

30 - 45 minutos

Moderado

Acidente de Marcação

Melhor Introdução

O que você precisa

Ferramentas

3/8" Allen Wrench
Link do afiliado
Disponível no/na Amazon
Visualizar

A iFixit ganha comissão quando você compra por estes links.

Passo 1 Handlebars

Raleigh M20 Handlebars Replacement, Handlebars: passo 1, imagem 1 %32

Raleigh M20 Handlebars Replacement, Handlebars: passo 1, imagem 2 %32

Strip all the accessories from your old handlebars. (reflectors, mirrors, etc...)
Using a 3/8" Allen wrench, loosen the nuts that hold the brake controls and gear shifters.

Editar

Passo 2

Raleigh M20 Handlebars Replacement: passo 2, imagem 3 %32

Place an Allen wrench (size doesn't matter) under the bike grip.
Twist the grip back and forth while pulling on the Allen wrench to remove the grip.

Editar

Passo 3

Slide off the gear shifters.
Slide off the brake controls.

Editar

Passo 4

Raleigh M20 Handlebars Replacement: passo 4, imagem 3 %32

Loosen the central nut on the faceplate that connects the bars to the steering column. If the bars are secured by a faceplate with a detachable top, loosen the nuts on the faceplate and remove.
Lift the handlebars from the bike frame.
Move the bars until they're in the correct position for your stance. Tighten the faceplate nuts with a 3/8" Allen wrench to firmly secure the handlebars in place.
Sit on the bike and make final adjustments to the positioning of the brakes and gears.

Editar

Conclusão

To reinstall the handlebars, complete these steps in reverse order. If there is a problem with the alignment, return to the handlebar repair guide and repeat step 4.