/
Minha bancada de trabalho

Obtenha acesso rápido a guias, peças e respostas para seus dispositivos

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Cadastre-se
Login
Junte-se à maior comunidade de reparos do mundo
Peças
GuiasRespostas
Editar
JBL Clip 3 Battery Replacement

JBL Clip 3 Battery Replacement

Kyle Montague

Kyle Montague e 8 outros colaboradores

Última atualização em July 31, 2024

35 minutos
Moderado

Introdução

Ir para o passo 1

The Clip 3 is IPX7 waterproof and offers up to 10 hours of playtime, powered by a 1000mAh rechargeable Li-ion battery. If the battery is not charging or holding adequate charge, the battery may require replacement.

This guide will show you the step by step process of replacing a speaker battery for a JBL Clip 3. The process won’t be too difficult, requiring no special skills. Make sure to be careful when removing parts on this device, because they can be fragile.

O que você precisa

Peças

Ferramentas

Exibir mais…

A iFixit ganha comissão quando você compra por estes links.

  1. JBL Clip 3 Battery Replacement, Speaker Grill: passo 1, imagem 1 %32 JBL Clip 3 Battery Replacement, Speaker Grill: passo 1, imagem 2 %32

    • Insert the iFixit opening tool between the speaker grill and speaker housing and pry around the entire perimeter of the device until the grill releases.

    • A strong adhesive attaches the grill to the housing, and requires some time and patience to break. Use mild heat to loosen the adhesive if necessary.

    Editar

  2. JBL Clip 3 Battery Replacement, Speaker Housing: passo 2, imagem 1 %32 JBL Clip 3 Battery Replacement, Speaker Housing: passo 2, imagem 2 %32

    • Use a Phillips #1 screwdriver to remove the five 6.3 mm screws around the perimeter.

    Editar

  3. JBL Clip 3 Battery Replacement: passo 3, imagem 1 %32

    • Separate the speaker housing from the rest of the body.

    • This requires minimal force; they are not glued together.

    Editar

  5. JBL Clip 3 Battery Replacement: passo 4, imagem 1 %32 JBL Clip 3 Battery Replacement: passo 4, imagem 2 %32
    Ferramenta utilizada neste passo:
    Tweezers
    $4.99
    Adicionar ao carrinho

    • Use tweezers to remove the 2 pin and 4 pin connectors from the motherboard.

    Editar

  6. JBL Clip 3 Battery Replacement, Carabiner Clip: passo 5, imagem 1 %32 JBL Clip 3 Battery Replacement, Carabiner Clip: passo 5, imagem 2 %32

    • Lift the metal carabiner clip from the speaker housing.

    • They are not glued together and should separate easily.

    • There are alignment tabs on the clip so the whole assembly will only reassemble in one orientation.

    Editar

    I’ve looked online and can’t find a place to buy the replacement clip. Any tips?

    Elizabeth Morgan - Responder

    Yea, me too. I’m glad I know how to replace it now but where do I get the part???

    Dustin Frank - Responder

    Agree. Showing how to replace a part when no replacment part is available is not at all helpful.

    Ed McAuliffe - Responder

    Has anyone found this part yet? I have 2 of these speakers that need a new clip!

    Paul J. Garay - Responder

    Another option is to remove the clip altogether as it is not fixable. Works fine without it!

    Paul J. Garay -

  7. JBL Clip 3 Battery Replacement, Speaker Battery: passo 6, imagem 1 %32 JBL Clip 3 Battery Replacement, Speaker Battery: passo 6, imagem 2 %32
    Ferramenta utilizada neste passo:
    Tweezers
    $4.99
    Adicionar ao carrinho

    • Use a pair of tweezers to lift the two cable connectors from their motherboard sockets.

    • The wires connecting to the battery are not very long, so be careful when removing them.

    Editar

  8. JBL Clip 3 Battery Replacement: passo 7, imagem 1 %32

    • Use a Phillips #1 screwdriver to remove the four screws that secure the motherboard.

    Editar

  9. JBL Clip 3 Battery Replacement: passo 8, imagem 1 %32

    • Gently lift the motherboard away from the speaker housing.

    • Take care not to damage the soldered connections when lifting the motherboard.

    Editar

  10. JBL Clip 3 Battery Replacement: passo 9, imagem 1 %32 JBL Clip 3 Battery Replacement: passo 9, imagem 2 %32

    • Use an opening tool to carefully pry your way around the battery, slowly lifting it off of the epoxy until it fully releases.

    • Avoid puncturing or bending the battery. It is a Lithium cell, so there is a bit of risk involved when completing this step. Be careful and patient, and there will not be any complications.

    • During reassembly, remember to superglue the new battery back into place.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas executaram este guia.

Autor(a)

com 8 outros contribuidores

Kyle Montague

Membro desde: 03/28/22

262 Reputação

Autoria de 2 guias

Emblemas: 10

+7 outros emblemas

Equipe

UMass Dartmouth, Team 1-5, Petersen Spring 2022 Membro de UMass Dartmouth, Team 1-5, Petersen Spring 2022

UMASSD-PETERSEN-S22S1G5

3 Membros

Autoria de 10 guias

5Comentários do guia

Thanks, but unless I missed something I don't see the recommended battery to replace with (only that it's a 1000mAh). Under "what you need" there's no mention of battery.

B.Bender - Responder

Amazon and others sell them. Just Google "JBL Clip 3 battery for sale". Price varies widely.

CalTee -

Thank you - very helpful guide! Was able to replace my battery with no issues.

JB Zorg - Responder

What can I use to create a new waterproof seal?

Seany Wheels - Responder

Is this the same process as for the JBL Clip 4?

Marc Oliver - Responder

Comentar

Visualizações:

Últimas 24 horas: 4

Últimos 7 dias: 32

Últimos 30 dias: 179

Ao todo: 7,755