Introdução

The grille is the part of the microphone that you speak into. Keeping the grille clean ensures that your sound quality is at its best.

Peças

Não são necessárias peças.

Hold the microphone just below the grille with one hand while using your other hand to rotate the grille clockwise to remove.
  • Hold the microphone just below the grille with one hand while using your other hand to rotate the grille clockwise to remove.

Adicionar comentário

Completely unscrew the grille and slide it off of the top of the microphone. The unprotected microphone is delicate, so place it somewhere safe while you follow the next steps.
  • Completely unscrew the grille and slide it off of the top of the microphone. The unprotected microphone is delicate, so place it somewhere safe while you follow the next steps.

Adicionar comentário

  • Put two drops of dish soap into a cup.

  • Add water to cup until half full.

Adicionar comentário

  • Place the grille in the solution of soap and water.

  • Let the grille soak for half an hour.

Adicionar comentário

  • Remove the grille from the cup and rinse it with cold water.

  • Allow the grille to air dry.

  • Make sure the grille and the foam inside it are completely dry before placing it back on the microphone.

Carefully remove the THIN foam filter Inside the grill. Wash this in the 2 drops of Dawn water solution.

Gently rinse in cool running water, blot dry and allow to dry. Reinstall into the grill after they both have dried.

Doug - Responder

Linha de Chegada

5 outras pessoas concluíram este guia.

nat coll

Member since: 27-09-2012

366 reputação

14 Guides authored

Equipe

Cal Poly, Team 7-53, Forte Fall 2012 Membro de Cal Poly, Team 7-53, Forte Fall 2012

CPSU-FORTE-F12S7G53

5 Membros

18 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 6

Últimos 7 dias: 37

Últimos 30 dias: 109

Todo: 5,717