Conserte seus objetos Comunidade Loja

How to Fix a Wobbly Hydraulic Barber Chair

Introdução

If your Manual Recliner Hydraulic Barber chair has issues with the balance, use this guide to assess and repair the problem.

The problem with an unbalanced hydraulic chair tends to be an issue with the base of the chair, usually due to missing or damaged screws.

This guide is simple enough that anyone with no experience in repair will be able to follow through to the end and achieve the result they wish.

Before beginning, make sure that you have another person to lend a hand as the seat of the chair might be too heavy for one person.

O que você precisa

  1. How to Fix a Wobbly Hydraulic Barber Chair, How to Fix a Wobbly Hydraulic Barber Chair: passo 1, imagem 1 %32 How to Fix a Wobbly Hydraulic Barber Chair, How to Fix a Wobbly Hydraulic Barber Chair: passo 1, imagem 2 %32

    • The issue with the barber chair is located at the base, where the screws have come loose.

    Editar

  2. How to Fix a Wobbly Hydraulic Barber Chair: passo 2, imagem 1 %32 How to Fix a Wobbly Hydraulic Barber Chair: passo 2, imagem 2 %32

    • Use your foot to repeatedly pump the hydraulic height-adjustment pedal under the chair until the chair reaches max height.

    • While holding the pedal down with your foot, grab both arm rests and pull the chair upwards.

    Editar

  4. How to Fix a Wobbly Hydraulic Barber Chair: passo 3, imagem 1 %32

    • Lift the base-ring off the base to reveal the holes for the screws.

    Editar

  5. How to Fix a Wobbly Hydraulic Barber Chair: passo 4, imagem 1 %32

    • Place a screw with a washer attached into a hole and tighten it with a 7/32" hex bit.

    • Repeat this process for the other 5 screws and washers.

    Editar

  6. How to Fix a Wobbly Hydraulic Barber Chair: passo 5, imagem 1 %32

    • Align the bottom of the seat with the top of the pole, and gently put it back into position.

    Editar

  7. How to Fix a Wobbly Hydraulic Barber Chair: passo 6, imagem 1 %32

    • Make sure the seat is properly fitted onto the pole by gently pushing down on the seat.

    • Check the stability of the pole by gently shaking the chair.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Gaurav Tiwari

Membro desde: 01/21/21

133 Reputação

Autoria de 1 guia

Emblemas: 2

Equipe

York University, Team S1-G28, Melo-Thaiss Winter 2021 Membro de York University, Team S1-G28, Melo-Thaiss Winter 2021

YORK-MELO-THAISS-W21S1G28

1 Membro

1 Guia de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 18

Últimos 30 dias: 48

Duração total: 3,516