How to Fix a Tear in a Jacket Lining

Última atualização em June 3, 2021

15 - 20 minutos

Moderado

Introdução

This guide will show you how to repair the ripped lining on a jacket and/or coat. Due to multiple uses, jackets and coats start to wear out and tear over time on lining. This will show people how to repair any tears that form on the lining of their jackets and/or coats. A lot of people deal with having to stop wearing their favorite jackets and coats due to tears. This guide can help repair those tears in minutes. Having to constantly throw out and buy new clothes because of rips can be expensive. By following these repair steps, this can help reduce peoples clothing consumption and clothes pollution. It will stop unwanted clothes from being found in landfills when thrown out.

O que você precisa

Ferramentas

Exibir mais…

A iFixit ganha comissão quando você compra por estes links.

Passo 1 How to Fix a Tear in a Jacket Lining

How to Fix a Tear in a Jacket Lining, How to Fix a Tear in a Jacket Lining: passo 1, imagem 1 %32

How to Fix a Tear in a Jacket Lining, How to Fix a Tear in a Jacket Lining: passo 1, imagem 2 %32

How to Fix a Tear in a Jacket Lining, How to Fix a Tear in a Jacket Lining: passo 1, imagem 3 %32

Turn the jacket inside out.

Editar

Passo 2

Put the thread through the needle hole.
Use thread that is the same color as the material you are sewing.

Editar

Passo 3

How to Fix a Tear in a Jacket Lining: passo 3, imagem 3 %32

Take the two ends of the thread and knot them together.

Editar

Passo 4

Cut the excess thread off.

Editar

Passo 5

How to Fix a Tear in a Jacket Lining: passo 5, imagem 3 %32

Push the needle through the fabric and pull it between the two threads to create a knot.
This prevents the thread from sliding through the fabric as you are sewing.

Editar

Passo 6

How to Fix a Tear in a Jacket Lining: passo 6, imagem 3 %32

Place one stitch on one side then place another one on the other side of the fabric.
Make sure the stitches are parallel and evenly distributed or the seams will not look straight.
Repeat this process until you have stitched down the length of the tear.