Conserte seus objetos Comunidade Loja

How to Change Strings on a Ukulele

O que você precisa

  1. How to Change Strings on a Ukulele, String: passo 1, imagem 1 %32

    • Start by loosening the string you are trying to replace by twisting the pegs.

    • The G and C tuning pegs turn up to tighten and down to loosen while the E and A tuning pegs turn down to tighten and up to loosen.

    Editar

  2. How to Change Strings on a Ukulele: passo 2, imagem 1 %32

    • Next, grab the new string you are using to replace.

    • The packaging will inform you of which string replaces which note—some are different than others so pay attention!

    Editar

  3. How to Change Strings on a Ukulele: passo 3, imagem 1 %32

    • Feed the string through the tie block.

    • Remember to leave slack.

    Editar

  5. How to Change Strings on a Ukulele: passo 4, imagem 1 %32

    • Wrap the string over the tie block and back underneath itself.

    Editar

  6. How to Change Strings on a Ukulele: passo 5, imagem 1 %32 How to Change Strings on a Ukulele: passo 5, imagem 2 %32

    • Recross the string over itself again, looping it two or three more times.

    Editar

  7. How to Change Strings on a Ukulele: passo 6, imagem 1 %32

    • Pinch the string and pull tightly.

    Editar

  8. How to Change Strings on a Ukulele: passo 7, imagem 1 %32

    • Now, fasten the string back to the headstock. To do this, feed the string through the hole in the turning peg.

    Editar

  9. How to Change Strings on a Ukulele: passo 8, imagem 1 %32

    • Twist again to tighten and cut off extra string once complete.

    Editar
Linha de Chegada

2 outras pessoas executaram este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 16

Duração total: 525