Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Introdução

Use this guide to replace the home button in your HP ElitePad 900.

  1. Unscrew the two 2.8mm Phillips #000 screws near the power connector.
    • Unscrew the two 2.8mm Phillips #000 screws near the power connector.

  2. Use a suction cup to pull the display assembly up. Use a suction cup to pull the display assembly up.
    • Use a suction cup to pull the display assembly up.

  3. STUDY UNPLUGGED

    Battery Fix Kits for Mac

    Shop Fix Kits

    STUDY UNPLUGGED

    Battery Fix Kits for Mac

    Shop Fix Kits
  4. Use the tip of a spudger to disconnect the two display ZIF connectors. Use the tip of a spudger to disconnect the two display ZIF connectors.
    • Use the tip of a spudger to disconnect the two display ZIF connectors.

  5. Remove the two 2.4mm Phillips #000 screws.
    • Remove the two 2.4mm Phillips #000 screws.

  6. Lift metal bracket along with blue connector.
    • Lift metal bracket along with blue connector.

  7. Replace connector.
    • Replace connector.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Kyle Marques

Membro desde: 03/09/2015

811 Reputação

6 Guias de autoria

Equipe

USF Tampa, Team 12-4, Blackwell Fall 2015 Membro de USF Tampa, Team 12-4, Blackwell Fall 2015

USFT-BLACKWELL-F15S12G4

4 Membros

6 Guias de autoria

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 6

Duração total: 504