HP Compaq NC6120 Mouse Pad Replacement

Mateo Cuellar e 3 outros colaboradores

Última atualização em June 23, 2015

10 - 15 minutos

Moderada

Ferramentas incorretas

Fotos de ação

Introdução

Vá para o passo 1

Replacing the mouse pad may be necessary when the cursor begins to respond sluggishly to movements. This can be done fairly easily after the laptop has been opened up.

O que você precisa

Peças

Exibir mais…

Passo 1 Disassembling HP Compaq NC6120 Laptop

HP Compaq NC6120 Mouse Pad Replacement, Disassembling HP Compaq NC6120 Laptop: passo 1, imagem 1 %32

HP Compaq NC6120 Mouse Pad Replacement, Disassembling HP Compaq NC6120 Laptop: passo 1, imagem 2 %32

HP Compaq NC6120 Mouse Pad Replacement, Disassembling HP Compaq NC6120 Laptop: passo 1, imagem 3 %32

Flip laptop so the backside is facing upwards.
Pull the two plastic switches at the top of the backside of the computer outwards, and remove the battery.

Editar

Passo 2

Remove all 13 screws from the back panel of the computer (includes the two torx screws under the battery and the two under the ram memory panel).
Remove the four screws at the hinge of the computer (also attaching the back panel to the rest of the computer).
All screws are 9.8mm 3.0 flatheads except for the two under the battery which are T9 torx.

Editar

Passo 3

Open up the laptop so that the screen is facing towards you. Push the monitor back until it is flat, parallel to the keyboard.

Editar

Passo 4

Using the iFixit opening tool, remove the plastic panel located between the keyboard and monitor. It should pop off easily with the spudger and can then be pulled away.

Editar

Passo 5

Remove the white cable attached to the just-removed plastic panel from the motherboard.

Editar

Passo 6

Flip the keyboard away from the monitor, rotating it so that the keys are face down on the mousepad. Remove the black cord at the bottom of the keyboard that connects it to the motherboard. The keyboard is now free and can be removed.

Editar

Passo 7

HP Compaq NC6120 Mouse Pad Replacement: passo 7, imagem 3 %32

Remove the two 9.8mm 3.0 flathead screws. There is one at each of the hinges.

Editar

Passo 8

HP Compaq NC6120 Mouse Pad Replacement: passo 8, imagem 3 %32

Unplug the black cable with rectangular white plastic head from the motherboard. It is located at the top left of the motherboard, directly below the left hinge.

Editar

Passo 9

Pull the monitor directly upwards from where it lay. The two metal hinges should easily slide out of their holes and the monitor will be disconnected from the motherboard.

Editar