Pular para o conteúdo principal
  1. Release the 3 clips that attach the front fan guard to the rear fan guard. Notice: The lower connecting bracket is NOT a clip. It acts as a mounting alignment bracket for the front fan guard.
    • Release the 3 clips that attach the front fan guard to the rear fan guard.

    • Notice: The lower connecting bracket is NOT a clip. It acts as a mounting alignment bracket for the front fan guard.

  2. Pull the front fan guard off.
    • Pull the front fan guard off.

  3. Remove the spinner from the center of the fan blade. Remove the spinner from the center of the fan blade.
    • Remove the spinner from the center of the fan blade.

  4. The fan blades should now be easy to lift up.
    • The fan blades should now be easy to lift up.

    • When reassembling the fan make sure the notches in the center of the fan blade line up with the protrusions in the motor's shaft.

Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas concluíram este guia.

Alan Su

Membro desde: 03-10-2012

537 reputação

6 Guias de autoria

Equipe

Cal Poly, Team 24-28, Regan Fall 2012 Membro de Cal Poly, Team 24-28, Regan Fall 2012

CPSU-REGAN-F12S24G28

4 Membros

10 Guias de autoria

Where do you buy the fan blades?

charlie - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 3

Últimos 30 dias: 12

Todo: 2,396