DJI Phantom 3 Advanced Landing Gear Replacement

Última atualização em March 27, 2019

5 minutos

Fácil

Introdução

This guide will outline the steps required to replace the landing gear on the DJI Phantom 3 Advanced. This includes unscrewing the landing gear as well as removing the receiver antenna from the gear in order to replace the gear.

O que você precisa

Ferramentas

Exibir mais…

Passo 1 Battery

DJI Phantom 3 Advanced Landing Gear Replacement, Battery: passo 1, imagem 1 %32

DJI Phantom 3 Advanced Landing Gear Replacement, Battery: passo 1, imagem 2 %32

With the battery facing you, locate the two tabs on the top and bottom of the battery as shown.
Remember to disarm and power down your quadcopter before beginning any disassembly.

Editar

Passo 2

Press the two tabs with your finger and thumb, and gently slide the battery towards you, out of the quadcopter frame.
With your other hand, be sure to hold the quadcopter steady to ensure that it stays still.

Editar

Passo 3 Landing Gear

DJI Phantom 3 Advanced Landing Gear Replacement, Landing Gear: passo 3, imagem 1 %32

DJI Phantom 3 Advanced Landing Gear Replacement, Landing Gear: passo 3, imagem 2 %32

DJI Phantom 3 Advanced Landing Gear Replacement, Landing Gear: passo 3, imagem 3 %32

Turn the phantom upside down.
Remove the eight 7.5mm long 3mm screws, securing the landing gear to the body of the quadcopter, with a T-8 screwdriver.

Editar

Passo 4

DJI Phantom 3 Advanced Landing Gear Replacement: passo 4, imagem 3 %32

Remove the rubber spacer in the landing gear by pushing the spacer out of the slot with your finger.

Editar

Passo 5

DJI Phantom 3 Advanced Landing Gear Replacement: passo 5, imagem 3 %32

Using a plastic opening tool, carefully separate the two pieces of plastic of the landing gear.
Be careful not to break the wire attached, as this is your receiver antenna.

Editar