CubiCubi 47 Inch Computer Desk Keyboard Tray Replacement

Introdução

It's important to keep your keyboard tray properly fastened to the desk to in order to maintain the integrity of the furniture and avoid any damage to your keyboard that is resting on the tray. This guide will show you how to tighten and reattach a keyboard tray to your CubiCubi 47 Inch Computer Desk.

No special skills are required to complete this repair. This repair is needed so you can have a sturdy desk while typing.

O que você precisa

Passo 1 Keyboard Tray

CubiCubi 47 Inch Computer Desk Keyboard Tray Replacement, Keyboard Tray: passo 1, imagem 1 %32

Pull out the desk tray so it's fully extended.

Editar

Passo 2

CubiCubi 47 Inch Computer Desk Keyboard Tray Replacement: passo 2, imagem 3 %32

Remove each of the 1.5 mm hex socket tray pillar screws with your screwdriver. Repeat for each corner.
Save these screws to reattach the tray later.

Editar

Passo 3

Detach the tray from the desk.

Editar

Passo 4

Tighten the four side screws on the tray.

Editar

Passo 5

Tighten the four screws connecting the tray pillar and the tray track.

Editar

Passo 6

Screw the tray pillars back on the desk with the 1.5 mm Hex socket screws. Repeat for each four corners.
Reattaching the screws alone may be difficult. Try using a small table to hold the tray up or you may need another person to help.

Editar