Canon EOS 40D Shutter Assembly Replacement
Introdução
Ir para o passo 1An Error 99 is an non specific error which means that camera doesn't know or have a code for the problem. In my case the shutter assembly needed replacing. This was a fairly involved process for a beginner such as myself.
This is not a comprehensive guide but should be used in conjunction with the Canon Service Manual and youtube videos. I hope that some of the pictures I took along the way might help you identify or remember how each step works.
O que você precisa
-
-
Get the Canon 40D Service Repair Manual
-
Have a clean and organized workspace. I labelled plastic trays by step number and put all items for each step in a separate tray.
-
Watch a couple Youtube videos on this process
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
6 outras pessoas executaram este guia.
2Comentários do guia
how do you replace the bridge (male portion on camera) other than putting the card in a card reader
how to replace the focus lock beeper
