Conserte seus objetos

Direito de executar reparos

Loja

Acer Nitro 5 AN515-53-55G9 Battery Replacement

Escrito Por: Gary Ellison (e 4 outros contribuidores)
  • Comentários: 1
  • Favoritos: 0
  • Execuções: 7

Dificuldade

Moderado

Passos

8

Tempo necessário

Sugerir um tempo??

Partes

1

Sinalizadores

0

Introdução

Use this guide to replace the Battery in the Acer Nitro 5 Acer Nitro 5 AN515-53-55G9. This laptop has a 4-cell battery, with this guide you can replace the battery if it is damaged or not working.

  1. Make sure laptop is off and unplugged before beginning replacement. Flip the laptop upside down so that the bottom is facing up. Identify the RAM tray on the bottom of the laptop.

    • Make sure laptop is off and unplugged before beginning replacement.

    • Flip the laptop upside down so that the bottom is facing up.

    • Identify the RAM tray on the bottom of the laptop.

    Editar

  2. Use the Phillips #0 screwdriver to remove the 9mm screw in the bottom left corner of the RAM tray covering. Remove the RAM tray cover by prying up with a spudger. Remove the RAM tray cover by prying up with a spudger.

    • Use the Phillips #0 screwdriver to remove the 9mm screw in the bottom left corner of the RAM tray covering.

    • Remove the RAM tray cover by prying up with a spudger.

    Editar

  3. Identify the Hard Drive tray to the left side of the laptop. Remove screw with a #0 Philips screwdriver. Lift up the Slot covering using a spunger.

    • Identify the Hard Drive tray to the left side of the laptop.

    • Remove screw with a #0 Philips screwdriver.

    • Lift up the Slot covering using a spunger.

    Editar

  4. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Comprar agora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Comprar agora

  5. Use the Phillips #0 screwdriver to remove the 9mm screws holding the back cover in place.

    • Use the Phillips #0 screwdriver to remove the 9mm screws holding the back cover in place.

    Editar

  6. Carefully remove the back shell from the device working your way around all the edges. Do not forcefully try to separate the shell as you may cause harm to the shell. Do not forcefully try to separate the shell as you may cause harm to the shell.

    • Carefully remove the back shell from the device working your way around all the edges.

    • Do not forcefully try to separate the shell as you may cause harm to the shell.

    Editar

  7. Removing the back shell of the computer and it will look like this. The battery for the device is located at the bottom middle of the laptop at this orientation.

    • Removing the back shell of the computer and it will look like this.

    • The battery for the device is located at the bottom middle of the laptop at this orientation.

    Editar

  8. Locate the connector of the battery to the motherboard. Using your fingers, slide out the connector. Using your fingers, slide out the connector.

    • Locate the connector of the battery to the motherboard.

    • Using your fingers, slide out the connector.

    Editar

  9. Remove battery from device.

    • Remove battery from device.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

7 outras pessoas concluíram este guia.

Um comentário

Adicionar um comentário

For future articles, you might consider adding a section describing how to “initialize” the replacement battery pack to maximize life.

Either that, or at least mention initialization plays a part in maximizing battery life and point to another article that provides reliable information.

Thanks for the article.

jmagecko - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 25

Últimos 7 dias: 215

Últimos 30 dias: 928

Duração total: 11,845