Ir para o conteúdo principal

Screen doesn't have a any output after replacement

Hi guys

I recently changed the screen on my iPhone 6s since it had cracked, but it doesn't seem to have anything come up on the screen. The phone is still working. iTunes still picks it up and everything. It's not recovery mode or anything, just no picture.

Any help would be much appreciated

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

are you sure that you insert lcd flexible correctly? i have also experienced same prob and fix it by replace mainboard

Esta resposta foi útil?

Pontuação 0

11 comentários:

Yes I believe that I have done everything correctly. I followed the steps on this site

por

you sure lcd module is not broken or defect? or try with other lcd if not show up you should reball the chipset, if you don't have experience at reballing with hot air you can try using hair dryer

por

How do I reball the chipset? I tried with another screen and I have the same problem, but it works on another phone that i have

por

Sounds like a faulty screen or blown backlight filter.

It's almost certainly a faulty screen if the old screen was working and just cracked and still works when you plug that one back in for testing.

I assume you unplug the battery first before unplugging / plugging in other cables?

por

I used the new screen on a different iphone and it seemed to work fine

por

Exibir mais 6 comentários

Adicionar um comentário

Adicionar a sua resposta

Shranal Kumar será eternamente grato(a).
Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Ao todo: 71