Menu
Suas configurações
Cancelar
Exibir:
DesaprovaçõesQualquer usuário com uma reputação maior do que 100 pode sinalizar comentários e postagens que apresentem problemas.
Mostrar detalhes
Reputação: 145
Postado:
i think my wireless part of my Lexmark has been broken or mess because my router does connect with all my devices not just with the printer . please help and let me know how do i fix wireless part in my Lexmark printer
Reputação: 25
Postado:
hello,
i can only think of router password . make sure you have the correct password for your wireless router . try doing a software or firmware update on both devices ( router and printer ) and try connecting the printer again with router . follow this blog for any other steps -http://fixingblog.com/how-to-connect-my-... see if this will work for you . thanks
Mostrar detalhes
Reputação: 1
Postado:
does the iphone 7 will work without display
Reputação: 1
Postado:
A new leaked warranty guide for Apple iPhones shows how the company https://www.mcdvoice.onl/
Mostrar detalhes
Reputação: 1
Postado:
Bonjour,
jai eu un problème avec mon laptop hp g60 550 ca.
c’est un vieux appareil et j,ai eu à le réparer plusieurs fois.
aujourd’hui j,ai fait une réparation sur le capot car il était rendu forçant à l’ouvrir
en l’ouvrant j,ai défait une plug de 4 fils que je vous mets dans cette video
exactement à la minute 4:44
http://www.youtube.com/watch?v=MbieJ2UuZ...
le gros dommage est que le plastique de cette plug était déjà très arraché, les fils sont toujours là mais je dois les brancher un par un dans le bon petit trou.
mais je ne sais plus lequel va où ….
si je me fie à d’autre vidéos, deux de ces 4 câbles servent à la caméra du capot.
je ne sais pas à quoi servent les deux autres…
j,ai essayer de rallumer le portable avec les 4 câbles débranchés …l,écran s’ouvre mais aucune image.
la vidéo montre un seul câble qu’il enlève mais dans mon cas c’est deux câbles qui sont sur la même prise.
merci pour votre aide !
Une autre vidéo avec le même détail de câble, minute 2:38
http://www.youtube.com/watch?v=ZvY8Xn7w5...
Une autre vidéo avec le même détail de câble, minute 2:38
Reputação: 1
Postado:
Une autre vidéo avec le même détail de câble, minute 2:38
Mostrar detalhes
Reputação: 1
Postado:
bonjour
merci de bien vouloir me donner quelques etapes pour le demontage de mon ns12m, je voudrais le nettoyer de la poussière.
salutations .
Mostrar detalhes
Reputação: 1
Postado:
Salut les tecno,
Je viens à vous avant le dernier recours. Quand je branche le chargeur la led sallume orange et s'éteint au bout d'environ 40secondes et s'éteint. Après ça la led sallume moins de 20 secondes et s'éteint.
J'arrive plus à allumer l'ordi non plus.Quand j'essaie, la led fait un seul clignotement blanc.
Que se passe t il ?
Mostrar detalhes
Reputação: 49,8k
Postado:
Don't try this, it's beyond insane.
The glass is fused onto the frame with strong adhesive, it is very easy to ruin the frame and even after best attempt, it still looks pretty obvious.
Mostrar detalhes
Reputação: 49,8k
Postado:
Don't try this, it's beyond insane.
The glass is fused onto the frame with strong adhesive, it is very easy to ruin the frame and even after best attempt, it still looks pretty obvious.
Mostrar detalhes
Reputação: 413
Postado:
my brother printer does not connect with my wifi router . all other devices are connected with router . i don't know my wireless pronter is broken or what how do i check that .please help me
Reputação: 19
Postado:
You have to follow below simple steps to connect Brother Printer to WiFi router:
1. Click on the ‘Menu’ tab on the machine’s control panel and press OK.
2. Select ‘Network’ and press OK.
3. Select the ‘LAN’ option and again press OK.
4. Find the ‘WLAN’ and click on ‘OK’ to confirm and wait for ‘WLAN enable’ to flash on your screen. After this step, wait for a moment as it will then start the wireless network wizard.
5. The device will now look for the network and display lists of available SSID’s, select the one SSID with which you wish to connect and press ‘OK’.
6. Enter the network key and press ‘ok’ and then select yes in order to apply your settings.
7. The device will now attempt to connect to the wireless device that you had selected. If your wireless device is successfully connected, the machine’s ‘LCD’ screen will display the status as ‘connected’.
8. Download the printer driver software and your machine is ready to print.
For more visit: https://printererrorcode.com/blog/how-to...
Mostrar detalhes
Reputação: 413
Postado:
my brother printer does not connect with my wifi router . all other devices are connected with router . i don't know my wireless pronter is broken or what how do i check that .please help me
Reputação: 19
Postado:
You have to follow below simple steps to connect Brother Printer to WiFi router:
1. Click on the ‘Menu’ tab on the machine’s control panel and press OK.
2. Select ‘Network’ and press OK.
3. Select the ‘LAN’ option and again press OK.
4. Find the ‘WLAN’ and click on ‘OK’ to confirm and wait for ‘WLAN enable’ to flash on your screen. After this step, wait for a moment as it will then start the wireless network wizard.
5. The device will now look for the network and display lists of available SSID’s, select the one SSID with which you wish to connect and press ‘OK’.
6. Enter the network key and press ‘ok’ and then select yes in order to apply your settings.
7. The device will now attempt to connect to the wireless device that you had selected. If your wireless device is successfully connected, the machine’s ‘LCD’ screen will display the status as ‘connected’.
8. Download the printer driver software and your machine is ready to print.
For more visit: https://printererrorcode.com/blog/how-to...
Mostrar detalhes
Jessica P. Fawkes @jessicapfawkes
Reputação: 187
Postado:
Hey fellow iFixers,
I wanted to ask you all a quick question that you can answer any way. I’m trying to figure out which generation of iPod and which type to buy, after my old 5th gen Nano literally blew up and split in half. I used to own a iPod Classic 5, but that got stolen, and I also had a 7th gen Nano, that had a shattered screen and LCD.
I want to buy the 7th gen again, for Bluetooth 4.0, as well as a ‘modern’ interface, but the other two have more features. The Classic is easier to repair and has a lot more available repair parts, whereas the 5th gen Nano had a video camera, and was pretty slim.
I’m lost. I need help. What’s your recommendation: 7th Gen nano, 5th Gen nano, or a 5th Gen Classic?
Cheers,
Jessica
Opa! Gostaria de mudar de ideia.
Expandir / Recolher
Passar
Para cima
Falha
Para baixo
Abrir Ajuda
