Pular para o conteúdo principal
Ajuda
Editando passo 4 —

Tipo de Passo:

Arraste para reorganizar

Locate the wiring back plate on the back of the guitar. This back plate is the one without any slots in it.

Use the Phillips 2 Screwdriver to remove all four of the 1/2" back plate screws. Set aside.

The back plate screws are very small. Use a dish or magnetic screw holder to keep track of them.

Remove the back plate to reveal the wiring components beneath. Set the plate aside.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.