Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 11 —

Tipo de Passo:

Arraste para reorganizar

Sometimes removing the connector from its socket isn’t enough; an additional step or two is required to free up the cable. Here we have a Lightning port ribbon cable that is lightly glued into place.

To remove it, carefully slide a spudger or guitar pick underneath the cable, freeing it from the adhesive.

For particularly delicate or stubborn cables, a little heat from a heat gun, hair dryer, or our handy iOpener will help soften the adhesive.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.