Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos



Tipo de Passo:

Arraste para reorganizar

To disconnect flat connectors like this one, use a spudger to pry up each side. Then, lift the connector straight up from its socket.

To reinstall, carefully position the connector, and then press it straight down until it snaps into its socket. Finger pressure is all that is required. If it won't snap home it'll be because it isn't correctly positioned. Sometimes it can take a little patience to find exactly the right position.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.