Ir para o conteúdo principal
Ajuda

Cricut Maker 3 Top Cover Replacement

Editando passo 14 —

Aviso: Você está editando um guia tipo pré-requisito. Todas as alterações que você fizer afetarão todos os 2 guias que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Peel up the tape securing the button wires to the inside of the top cover.

During reassembly, if this tape isn't sticking well, replace it with a piece of electrical tape to make sure these wires don't get caught in the gears.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.