Ir para o conteúdo principal
Ajuda

Screen Removal

Editando passo 15 —

Aviso: Você está editando um pré-requisito do guia que você estava consultando. Todas as alterações que você fizer afetarão todos os guias de 15 que incluem este passo.

Tipo de Passo:

Arraste para reorganizar

Be very careful performing this step, as you risk damaging tiny components around the press connector.

Insert the tip of an opening pick under the bottom right edge of the display cable press connector, right above the nearby screw hole.

Pry up and disconnect the display cable press connector.

To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.