Conserte seus objetos Comunidade Loja
Ajuda

*Read guide note* How to rebuild a laptop CMOS battery

Editando passo 3 —
Verify polarity and tape the leads onto the new cell

Tipo de Passo:

Arraste para reorganizar

ONLY USE ENOUGH TAPE FOR A FIRM HOLD. Using too much may short out the cell! In addition to using as little tape as possible, the cell must be tested before installation with a multimeter!

After the polarity has been matched, tape the positive lead to the new cell. To remove the risk of a failed rebuild, start on the + side and cut the tape to fit comfortably.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.