Ir para o conteúdo principal
Ajuda

Yamaha YPG-225 Main Circuit Board Replacement

Editando passo 3 —

Aviso: Você está editando um guia tipo pré-requisito. Quaisquer alterações que você faça afetarão o guia que inclui este passo.

Tipo de Passo:

Arraste para reorganizar

Move the ribbons out of the way, and remove the eight 10mm screws in the middle that hold the circuit board down.

Remove the two 12mm screws in the corner of the circuit board.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.