Ir para o conteúdo principal

Repair and disassembly information for Sony WH-1000XM2 wireless noise-cancelling over-ear headphones.

7 Perguntas Visualizar todos

Damage to Charging Port Sony WH-1000XM2

I have accidentally push the charger into the charge port in the wrong direction and have bent two of the pins inside the port. I need to replace the charging port but I am struggling to find parts or a guide. Any recommendations on where I can find a replacement port for Sony Wh1000xm2?

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0

2 comentários:

if you can get it opened and post a photo of the port it would help as not all ports are specific to an item

por

hi Daniel I have managed to get it open, here is the image: https://imgur.com/2tf0lNi

por

Adicionar um comentário

1 resposta

HI @lmalfunctionl

I made a guide on a similar model

SONY WH-CH700N bluetooth headphones USB charging port Replacement

I think the micro USB part is similar in yours:

https://www.ebay.co.uk/itm/142512274587

Hope it helps!

Esta resposta foi útil?

Pontuação 0

3 comentários:

Hi Honakrisi, thanks for the guide. Here is a link of the part I am looking for.: https://imgur.com/2tf0lNi

Would you happen to know if I am able to source this part with the board or if it is better to solder the port on?

por

I think you would struggle to find the charging board assembly. I would just desolder the port and put a new one on. Much more cost effective as well.

por

Hi @lmalfunctionl

If your in Australia, grabbing a port from jay car works. I've done this before and it still works wonders

If not, disregard all of that and just find a cheap but quality port and a soldering kit (If you don't already have one)

por

Adicionar um comentário

Adicionar a sua resposta

Kajol será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 10

Últimos 30 dias: 42

Duração total: 783