My red standby led blinks twice when I try to turn on my tv.
The standby led (red) blinks 2x
Exibir:
AprovaçõesQualquer usuário com uma reputação maior do que 20 pode sinalizar comentários e postagens que apresentem problemas.
Exibir detalhes
Reputação: 217
Postado:
The standby led (red) blinks 2x
Reputação: 685,3 mil
Postado:
Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.
IMPORTANT: After you repair the unit, you MUST clear the values on this diagnostic screen. These codes do not reset themselves after the fault is corrected, so if you don't clear them, you'll be seeing "old" fault codes the next time you enter this screen. Clearing is done by going into the service mode (display, channel, 5, volume plus, then power ). Press 8 and Enter, which returns everything to the factory preset condition.
Opa! Mudei de ideia.
Expandir / Recolher
Passar
Para cima
Falha
Para baixo
Abrir Ajuda
Página 1 de 1