Can't start 04 santa fe after changing fuel pump
changed fuel pump on my 04 santa fe, won't start, how do I bleed the air?
Exibir:
AprovaçõesQualquer usuário com uma reputação maior do que 20 pode sinalizar comentários e postagens que apresentem problemas.
Exibir detalhes
Reputação: 1
Postado:
changed fuel pump on my 04 santa fe, won't start, how do I bleed the air?
Reputação: 102,5 mil
Postado:
There should be a schrader valve on the fuel rail . Find this then cycle the key and listen for the pump dont engage the starter just turn the key to the run position . once you've heard the pump run and shut off then go to the shrader valve and release the pressure on the rail . Put a cloth over the valve to catch the gas as it will spray out with pressure . Repeat this a couple of times then finally cycle the key again until the pump shuts off and without releasing the pressure at the valve , try to start the car. If at any point you dont hear the pump running there is a problem with the pump or in the relays or fuses and this must be addressed. Hope this helps
Opa! Mudei de ideia.
Expandir / Recolher
Passar
Para cima
Falha
Para baixo
Abrir Ajuda
Página 1 de 1