Conserte seus objetos Comunidade Loja
Ajuda

Adding a Remote Page Turning Switch to the Kindle 3

Editando passo 4 —
Adicione um título

Tipo de Passo:

Arraste para reorganizar

Here is the external connector to be rewired. It's attached with 4 #00 JIS screws and is not soldered to the pads on the logic board.

Rather than cutting traces and connecting directly to the pads, I covered them with a piece of Kapton and made new 'pads' with two strips of copper tape. There is a little IC that you will need to run over, but this step is very easy (and reversible).

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.