Ir para o conteúdo principal
Ajuda

Fitting Ski Bindings to a New Pair of Boots

Editando passo 8 —

Tipo de Passo:

Arraste para reorganizar

Insert a piece of paper between the bottom of the boot and the toe bar.

Tighten the screw at the front of the toe piece until there is resistance when pulling the paper out.

You should be able to pull the paper out without it ripping but not push it back in.

Over-tightening of the toe bar can be dangerous. Practice caution and take your time.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.