Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Loja

Ajuda
Editando passo 2 —

Tipo de Passo:

Arraste para reorganizar

Insert an opening pick into the seam at the bottom edge of the controller (opposite the L and ZL buttons).

Slowly slide the flat edge of your opening pick up the side of the Joy-Con.

Be careful not to slide the opening pick too far inside the Joy-Con. This may damage the inner components. The back panel loosens fairly easily, so not much pressure is needed.

Suas contribuições são licenciadas pela licença de código aberto Creative Commons.