Schematics and pictures of circuit board. Very often the wire feeder stops working because of died relay. You can replace the defective one with a more durable 8A relay.
Stef_AN @stefan27396
Rep: 159
1
Postado: 3 de jun de 2024
Schweissgeraet 1
Esta é uma boa pergunta?
3 comentários:
Hi @stefan27396,
Unfortunately you don't have enough rep points to add it to the guide so I'll do it
Thanks for providing the info.
Moderator
3 de jun de 2024 por jayeff
Hi @jayeff ,
thanks for your help, I'm new here and trying to fight my way through this...
Have the same welding machine here and would like to post all the information I've discovered so far here to help other people.
3 de jun de 2024 por Stef_AN
@stefan27396
If you haven't done so already, click on the device icon link to the right of your question at the top of the page.
When the repair guide page opens scroll down to find all the documents (including the one you provided -thanks once again) linked with the device.
Cheers
Últimas 24 horas: 0
Últimos 7 dias: 0
Últimos 30 dias: 1
Duração total: 19
Hi @stefan27396,
Unfortunately you don't have enough rep points to add it to the guide so I'll do it
Thanks for providing the info.
Moderator
por jayeff
Hi @jayeff ,
thanks for your help, I'm new here and trying to fight my way through this...
Have the same welding machine here and would like to post all the information I've discovered so far here to help other people.
por Stef_AN
@stefan27396
If you haven't done so already, click on the device icon link to the right of your question at the top of the page.
When the repair guide page opens scroll down to find all the documents (including the one you provided -thanks once again) linked with the device.
Cheers
por jayeff