Ir para o conteúdo principal

Repair guides for cameras of the now-discontinued Minolta line.

103 Perguntas Visualizar todos

Why is my mode indicator not working? Minolta Maxxum 300si

The little triangle that indicates what mode the camera is on isn’t present, is there a way to fix this issue?

Block Image

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

On the 300si these are essentially so stripped down they are fully automatic SLRs of the 90's. You cannot change it into a manual mode, but you can press the mode button and switch the predefined shooting scenes. When you have not selected one, the camera is making all of the decisions.

Enabling one of the shooting modes (partially) overrides the full auto nature of the 300si, but not completely. There's sadly no way to add a manual mode to these as they were severely cost-reduced to appeal to beginners who didn't want to buy a proper film SLR back in the day. However, Minolta is not alone; Canon and Nikon have some too. The market responded by saying we do not want these. I'd sooner deal with the aperture gear problems on the Maxxum 7 over a 300si, or even buy a Maxxum 5.

Esta resposta foi útil?

Pontuação 0
Adicionar um comentário

Adicionar a sua resposta

Nat727 será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 4

Duração total: 35