Rep: 13
1
When I open the camera app, I get a brief picture then it freezes and says "Warning : Camera failed" I've already replaced both the front facing camera and the rear camera module, but have the same results. I didn't see any damaged pins/connections when I took everything apart, could it be a damaged motherboard?
Esta é uma boa pergunta?
Rep: 34,7 mil
10
22
44
more than like an issue with the motherboard
Esta resposta foi útil?
Rep: 783,6 mil
1,1 mil
894
2,3 mil
@mr_shade it is possible that this is a PCB issue but there are no direct connections between components. You could check the individual components and see what that shows you.
I would also suggest to reinstall the firmware to make sure that this is not Software related. This should help located the components etc. SM G988B Schematic
Esta resposta foi útil?
Thanks for the schematic! I will take a closer look at the motherboard when I get a chance.
Últimas 24 horas: 1
Últimos 7 dias: 4
Últimos 30 dias: 17
Duração total: 154
