Conserte seus objetos Comunidade Loja

Repair guides and support for the 27" Dell UltraSharp U2711 external display released in February 2010.

7 Perguntas Visualizar todos

Opções

How to use iMac monitor stand on VESA VGA monitor

I bought a Digitech Computer Articulating Desk Mount with bracket (model CW-2870) because its cheap. But I want to use it to mount a VGA monitor that is VESA-compliant ! How do you do that?

Update (01/13/2020)

This is the Digitech Computers’ CW-2870 from JayCar

Block Image

Responder a esta pergunta Também tenho esse problema

Esta é uma boa pergunta?

Sim Não
Pontuação 0
Adicionar um comentário

1 resposta

Filtrar por:
Mais úteis Mais recentes Mais antigas
Pergunta mais útil

Opções

It looks like I need to improvise. Oh well, here goes:

  1. First, source a stainless steel strip to ‘construct’ an iMac-like mount

#

Block Image

** This will then be mounted on the VGA monitor’s VESA-compliant mount

#

Block Image

  1. procure some nut/bolts

#

Block Image

  1. drill holes onto the stainless stell strip and attached it to iMac mount of the DigiTech articulating arm with the bolts.

#

Block Image

  1. Secure these on to the VESA mount of the monitor

#

Block Image

  1. mount the assembled iMac attached to the VESA mount of the monitor onto the monitor

#

Block Image

  1. mount the monitor to the articulating arm. Secure with provided allen screw

#

Block Image

All done !

Block Image

Esta resposta foi útil?

Sim Não
Pontuação 2

3 comentários:

Hi @junmac ,

Pretty nifty. ;-)

How about you create a guide for others down the track who may not find this post

Dare To Repair: How To Create a Guide

Cheers.

por

Hi @junmac ,

Thank you

por

Adicionar um comentário

Adicionar a sua resposta

Jun Mac AUS será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 15

Duração total: 189