Ir para o conteúdo principal

Released June 2017, the iPad Pro 10.5" replaces the 2016 iPad Pro 9.7".

145 Perguntas Visualizar todos

Help identifying missing component on iPad Pro 10.5"

Block Image

Does anyone know what the component is in the attached pic? The marking on top is N6. I think it may be related the gas gauge? I can’t find a similar looking component on some of the spare boards I’ve got lying around. I looked near the battery connector on the Air 1 & Air 2 but I don’t see anything that appears similar. I’ve got 3-4 boards all . missing that component and all of them are bootlooping

Respondido! Ver a resposta Também tenho esse problema

Esta é uma boa pergunta?

Pontuação 0
Adicionar um comentário

1 resposta

Solução escolhida

While there is no schematic for this device, the pad pattern is clearly one of a MOSFET. Based on this, there is a very high probability that using an iPhone 7 / Q2102 MOSFET will do the trick. You can salvage one from a dead board or order them new from DigiKey/Mouser (PN# RV3C002UN).

Esta resposta foi útil?

Pontuação 4

1 comentário:

Thanks Minho

por

Adicionar um comentário

Adicionar a sua resposta

butterfries será eternamente grato(a).
Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 164